Motorization
RESOURCES
The factory will make the blind to your measurements, there are no deductions for an outside mount. Width Wall Mount: Measure the width of the window opening. If there is room, add between 3" to 6" on each side of the window opening to ensure a minimum light gap. Round this number to the nearest 1/8th of an inch. Trim Mount: Measure the trim's width from the outside edge on each side, left to right. Make sure the trim is flat and solid at the far edges because the blind mounts will be at each end of the headrail. Round this number to the nearest 1/8th of an inch. Height Wall Mount: Measure the height of the window opening from top to bottom and add 3" to 6" to this number. You must add a minimum of 2 1/2" in height to allow for mounting brackets above the opening, the rest is added for desired overlap at the bottom. Trim Mount: Measure the trim's outside edge from top to bottom. Make sure the trim provides a flat space so you can mount the blind to it. Note: If the window sill protrudes at the bottom of the window, measure to the top of the sill in three places and take the maximum value. Approximate Stack Heights Approx Stack Height for Wood Blinds Approx Stack Height for Bamboo Shades Approx Stack Height for Roman Shades 
Measuring Outside Mount for Horizontal Shades
Black Arrow represents Wall Mount Red Arrow represents Trim Mount
AfterHoursInsurance.com It's 5:00 pm somewhere! Ready for your Window Treatments?
Call us TODAY! 954 553 9648
©2014 After Hours Blinds  -  All Rights Reserved  -  Phone: 954 553 9648    -    ReadyToGoOnline.com